How to do zone doubling in CA62?

Back
2013.04.29

1. Hardware connections – to double one zone it should be connected as on the picture below:

2.Software programming – the zone should be programmed with attribute doubling as the schematic below:

3.After setting the doubling in paragraph 2, the second zone should be software enabled. For example we doubled Zone 2 and the second Zone is 8. Enabling can be done on address 2020 with pressing number from 1 to 9 (depending on zone’s type).

4.Zone 1 can not be doubled. To have zone 7, two keypads are needed.