Procedure for cleaning SensoMAG detectorsBack
In order to clean up the detector you have to remove the plastic cover and the other plastic parts.
Please follow the steps illustrated by the pictures:
1.First you have to remove the PCB from the base. That has to be done after pulling out the plastic trotter and slightly pulling the PCB up.
2.The removed PCB has to be disassembled with a screwdriver.
BE CAREFUL WITH THE SIDE PLASTIC HOLDERS.
3.Then you have to clean the entire chamber with compressed air.
4.First you have to blow the internal part. And then the external part.
5. Then clean the assembled PCB
6.Finally you also have to blow the outside part – plastic cover.
7.After all these procedures, you have to start assembling in the reverse order.