Find a distributor



IRIS with New Auto-addressing Feature

Dear Partners and Customers,

We are glad to announce the new feature of IRIS – auto-addressing.

Now your installation of IRIS system will be easier. The installer could mount all devices without setting addresses. The panel will do it automatically afterwards.

The system IRIS/SensoIRIS supports 2 ways of auto addressing: by ID and by built-in isolator.

When using auto-addressing by ID, the system gives addresses to all devices in increasing order of their unique IDs, starting with detectors, followed by sounders and strobes, call points and modules on last place.

When using auto addressing by built-in isolator, the panel gives addresses to all devices in increasing orders from 1 to 250, following the sequence of their position on the installation cable.

You can use the new functionality from version 5.1.4 of IRIS.

Auto-addressing is available with the following SensoIRIS products and their hardware/software versions:

SensoIRIS MIO22 (HW.2.0/SW.2.0)

SensoIRIS MOUT (HR2.0/SR2.0)

SensoIRIS MIO04 (HW.2.0/SW.2.0)

SensoIRIS MIO40 (HW.2.0/SW.2.0)

SensoIRIS MOUT240 (HR2.0/SR2.0)

SensoIRIS MCP150 (HR2.0/SR2.0)

SensoIRIS MC-Z (HW.2.0/SW2.00)

SensoIRIS M140 (HR2.00/SR1.08)

SensoIRIS S130 (HR2.00/SR1.08)

SensoIRIS T110 (HR2.0/SR1.08)

SensoIRIS WSST EN54-23 (HR2.0/SR2.0)

SensoIRIS WSOU (HR2.0/SR2.0)

SensoIRIS WS (HW.2.0/SW.2.0)

SensoIRIS BSST (HW2.0/SW2.01)

SensoIRIS BSOU (HW2.0/SW2.01)