Loop Tester

The loop tester is a diagnostic device for cable test prior detectors installation, for loop continuity test after devices installation and for auto-addressing.

 

Category:

Description

  • Power supply from 220 V AC grid and Adaptor included
  • For cable test until detectors and sirens are still not mounted
  • Loop or Line tests available
  • Total loop test report or single test available
  • Loop Short/Loop Break localization for both Addressed and Unaddressed loop
  • Branch detection with report for number of devices and begin/end point
  • All Methods of Addressing available.
  • Easy navigation with 4 buttons only and turn ON/OFF switch

Product Documents

Marketing Documentation

Loop Tester – Datasheet
Updated at 30.11.2020 Size 0.16MB

Certificates

Loop Tester - Declaration of conformity
Updated at 18.12.2020 Size 0.27MB

Technical Documentation

Loop Tester – Technical and Operation Manual
Updated at 03.12.2020 Size 1.06MB
Loop Tester – Quick Operation Guide
Updated at 03.12.2020 Size 0.44MB

Product pictures