SensoIRIS GAS is addressable gas, LPG and CH4 (Methane), leakage detector. When flammable gas is present in concentrations, higher than the dangerous, threshold alarm level is activated. Red indicator lights on and buzzer is turned on. Gas detector has auto diagnostic function. It continuously checks sensor and electronics status. If problem with sensor or electronics yellow LED is activated, green LED blinks and sound signal is activated.


The SensoIRIS GAS detector must be connected only to fire panels, which support TTE communication protocol!

SKU: 546 Category:


SensoIRIS GAS features a button with the following functions:

  • If short pressed “SILENCING” mode is activated. Green LED flashes, buzzer and panel activation are disabled for 5min;
  • If pressed for more than 5 seconds “TEST” mode is activated. In this case green, red and yellow LED’s are activated. Panel and buzzer are activated, too. After 6 seconds gas detector emits 2 short sounds and leaves “TEST” mode.
Power supply 24VDC
Power consumption <3W
Protection against electric shock: Class III
Power connection hard wired
Alarm threshold 10%LEL
Alarms sound level ≥ 85dB
Sensor type catalytic
Sensor lifetime 5 years
Detected gases LPG/CH4 (Methane)
Enclosure color White
Heating-up time 30 sec
Size 130х96х38mm
Weight 0,200kg

















Product Documents


SensoIRIS GAS - Declaration of conformity
Updated at 06.07.2023 Size 0.13MB

Technical Documentation

SensoIRIS GAS - Installation manual
Updated at 27.03.2020 Size 0.10MB

Product pictures