Redundant Network Module IRIS/SIMPO

Redundant Network Module IRIS/SIMPO is a module used for building of a Ethernet network between Teletek Electronics addressable panels IRIS, IRIS PRO and SIMPO. The modules allows to connect up to 64 fire alarm panels in network and secures a back up connection line of the communication between the panels. The communication is over RS 485 protocol. The maximum distance between two Redundant network modules is 1000 m.

Operation with Redundant Network Module IRIS/SIMPO is supported for the following revisions of the panel:

For IRIS fire alarm panel:

– LCD PCB Hardware revision: 2.4 and higher

– MAIN Board Firmware revision: 4.2 and higher

For SIMPO fire alarm panel:

– MAIN Board Firmware revision: 2.8 and higher

 

SKU: 538 Category:

Description

  • Maximum fire alarm panels in network – 64
  • Communication – RS485
  • Secure a Back up connection line of the communication between the panels.
  • Interface connection between the panel and module (plug in in the panel)
  • Maximum distance between two Redundant network modules – 1000 m.
  • Programming from the panel
  • Power supply from the panel
  • Cable connection:
  • Twisted pair
  • Length – max. 1000m (between two modules)
  • Cross Section – 0.5 – 2.5mm²

Operation Modes:
Normal – Blinking LEDs
Trouble – Lighting on LEDs

LED Indication:
LED1 – Output communication
LED2 – Panel-Modul communication
LED3 – Input communication

Product Documents

Marketing Documentation

Redundant Network Module - Datasheet
Updated at 17.03.2023 Size 0.17MB

Technical Documentation

Redundant Network Module - Installation manual
Updated at 04.03.2020 Size 0.06MB

Product pictures

Related products