# Teletek Electronics: Teletek Electronics Official Website > At Teletek, we develop and manufacture advanced voice evac, intruder and fire alarm systems, backed by over three decades of expertise\. Generated by Yoast SEO v28.0, this is an llms.txt file, meant for consumption by LLMs. ## Pages - [Case studies \& Reference List](https://teletek-electronics.com//case-studies/) - [Solutions](https://teletek-electronics.com//solutions/) - [Facility](https://teletek-electronics.com//facility/) - [About us](https://teletek-electronics.com//about-us/) - [Quality](https://teletek-electronics.com//quality/) ## Posts - [Fire Alarm Upgrade vs Replacement: Which Is Better?](https://teletek-electronics.com//fire-alarm-upgrade-vs-replacement/) - [Fire Safety in Residential Buildings: From Individual Homes to Large Complexes](https://teletek-electronics.com//fire-safety-in-residential-buildings-from-individual-homes-to-large-complexes/) - [Types of Intruder Detectors Explained: PIR vs MW vs Dual Technology Detectors](https://teletek-electronics.com//types-of-intruder-detectors-explained-pir-vs-mw-vs-combined-detectors/) - [Fire Alarm Systems for Small Businesses: A Guide for Shops and Offices](https://teletek-electronics.com//fire-alarm-systems-for-small-businesses/) - [Fire Safety in Large Commercial Buildings: Planning for Scale and Complexity](https://teletek-electronics.com//fire-safety-large-commercial-buildings/) ## Products - [Repeater TFT IRIS/SIMPO](https://teletek-electronics.com//product/repeater-tft-iris-simpo/): IRIS/SIMPO TFT is a wired fire alarm repeater panel that mirrors system information from compatible IRIS and SIMPO addressable fire alarm panels\. It gives personnel access to system status from another operational point, without needing to remain beside the main control panel\. This makes it particularly useful at locations such as reception desks, security rooms or secondary entrances\. The repeater connects through its built\-in RS485 network module or a standard LAN network\. RS485 networks support up to 64 nodes and distances of up to 1 km between panels\. System information is presented through a 7\-inch TFT touchscreen and LED indicators, while authorised operators can reset, evacuate, silence sounders and silence buzzers across networked panels\. A 10,000\-event log, multilingual interface, real\-time clock and micro USB connection support operation, programming and firmware updates\. The repeater is BOSEC certified and designed according to EN 54\-2\. - [PIRIN MW/AM](https://teletek-electronics.com//product/pirin-mw-am-microwave-pir-intruder-detector/): PIRIN MW/AM is wired dual technology \(MW and PIR\) motion detector, with anti\-masking and anti\-spray function\. The detector supports 3 different working modes, depending on the installation needs – AND, OR and Triple knock\. The device has an additional sensitivity adjustments of both MW and PIR parts\. The build\-in EOL resistances improve the installer experience significantly\. PIRIN MW/AM offers a wide range of EOL values, which makes the detector installation simple and less time\-consuming\. - [Natron MCP PR](https://teletek-electronics.com//product/natron-mcp-pr/): \

Natron MCP PR is a wireless \Type B manual call point\ for Natron fire alarm systems\. It works with both \\Natron WE\-A\ \and \\Natron WE\-C\\ wireless gateways and is designed for indoor applications where installing or concealing cables is difficult, or where an existing fire alarm system requires wireless extension\.\ \

As a Type B call point, activation requires \two deliberate actions\: breaking the non\-resettable glass element and then pressing the resettable operating button\. This provides a clear distinction from the Type A Natron MCP, which uses a different operating method\.\ \

Bi\-directional Beacon\+ communication provides a specified wireless range of up to \1,500 m in open area\\. Natron MCP PR also includes tamper monitoring and a signal coverage test, while a single CR123A battery provides specified operation of up to \10 years\\.\ - [Natron MD](https://teletek-electronics.com//product/natron-md/): \

Natron MD is a wireless combined fire detector that integrates \optical smoke sensing with rate\-of\-rise heat detection\ in one device\. It works with both \\Natron WE\-A\\ and \\Natron WE\-C\\ wireless gateways, making it suitable for wireless and hybrid fire alarm system architectures\.\ \

The detector uses bi\-directional Beacon\+ wireless communication with a specified range of up to \1,500 m in open area\\. A signal coverage test supports installation checks, while sensitivity adjustment and 360° LED indication provide additional commissioning and status functions\.\ \

Natron MD also includes an \80 dB internal buzzer\ for local alarm signalling and a built\-in tamper switch\. Three CR123A batteries provide specified operation of up to \10 years\\. The detector is IP30 rated and certified to \EN 54\-5, EN 54\-7 and EN 54\-25\\.\ - [Natron SD](https://teletek-electronics.com//product/natron-sd/): \

Natron SD is a wireless optical smoke detector for indoor fire alarm installations using \\Natron WE\-A\\ or \\Natron WE\-C\ \gateways\. It can be used within Natron wireless and hybrid system architectures where running new detector cabling is difficult or undesirable\.\ \

Bi\-directional Beacon\+ communication provides a specified wireless range of up to \1,500 m in open area\\. The detector also provides a signal coverage test, sensitivity adjustment and 360° LED indication, supporting installation, commissioning and detector status visibility\.\ \