Skip to content Skip to footer

SensoIRIS GAS

Facility type:ResidentialResidential

SensoIRIS GAS is an addressable gas detector for LPG and methane (CH4) leaks. It is designed for connection to compatible Teletek fire alarm panels that support the TTE communication protocol.

When the concentration of flammable gas exceeds the alarm threshold, the detector activates its red LED and built-in buzzer and sends an alarm signal to the connected panel. The installation position must be selected according to the gas being monitored.

An automatic diagnostic function continuously monitors the sensor and electronics. If a fault is detected, the yellow LED lights, the green LED flashes and an audible signal is activated.

A short press of the button activates a five-minute silencing mode, temporarily disabling the buzzer and panel activation. Holding the button for more than five seconds starts the test mode, which checks the LEDs, buzzer and communication with the panel.

Additional information

Detection architecture

Addressable

System element

Periphery

Product type

Special applications

Technology type

Wired

Category: Product ID: 68542

Description

Description

Why Choose SensoIRIS GAS?

Addressable Identification
Gas alarms and detector status are communicated to the connected fire alarm panel.

Local Warning
The built-in indicators and buzzer provide an immediate warning in the protected area.

Automatic Diagnostics
The detector continuously monitors its sensor and electronics for faults.

At a Glance

  • Detects LPG and methane (CH4)
  • Addressable wired connection
  • Compatible with panels supporting TTE protocol
  • Alarm transmitted to the fire alarm panel
  • Built-in red alarm indicator and buzzer
  • Automatic sensor and electronics monitoring
  • Visual and audible fault indication
  • Five-minute silencing mode
  • Built-in test mode

Looking for a standalone version? Check out the SensoGAS NG/LPG.